Los Angeles Electrician Tips For Upgraded Wiring

Posted on June 11, 2012 | by K Hopkins | 5 Comments

Have you been calling for help from an electrician in Los Angeles more often than you’d care to admit? If you have old wiring, whenever you’ve had an electrical service call the electrician should have made you aware of the wiring situation. A knowledgeable Los Angeles electrician will tell you when your electrical wiring needs to be replaced.

Cloth insulated wires may not be grounded properly and are definitely unsafe by today’s standards. The cloth actually falls off, leaving exposed wires in vulnerable areas of your home. If a home’s wiring is aluminum, the wiring shrinks and expands at contact points, causing a potential fire hazard. Neither method is safe. If you think your home may contain either of these types of wiring, The Electric Connection specializes in wiring upgrades for older homes.

The knob and tube wiring that electricians in Los Angeles used before the 1940s employs the use of ceramic knobs and tubing, with wires running through the tubes. It is not a grounded system, so plugging in any modern appliances or electronics is an immediate fire hazard. There are a number of insurance companies that will not offer fire insurance to homes with this type of system. An electrician in Los Angeles from The Electric Connection can upgrade knob and tube for you also.

Homeowners hear the words “electrical upgrade” and immediately start to see dollar signs. With the Electric Connection, the prices are affordable and the work that is recommended is an investment, not an expense. Older wiring systems are not only unsafe; they’re raising the cost of your electricity. More modern systems were developed with efficiency in mind. When a home is upgraded from knob and tube wiring or aluminum wiring, the electric bill immediately goes down, as does the insurance bill and the home repair budget – no more calling a Los Angeles electrician once a month for blown fuses or shorts.

The Electric Connection is the electrician Los Angeles CA homeowners contact most often for electrical upgrades. With over thirty years experience and twenty-five full time employees, all residential and commercial electrical services needs are handled quickly, efficiently, and affordably. Whether it’s a rewiring, an installation, or new construction, the professionals at the Electric Connection can handle it in a timely fashion. If you’re an LA homeowner, your family and your wallet will be happy that you did.

Click here to read more.

Is Your Electrical Panel Safe?

Posted on April 25, 2012 | by K Hopkins

If your electrical panel has fuses rather than circuit breakers, safety can be an issue. Even some electrical panels equipped with circuit breakers can pose safety hazards and need to be upgraded.

Another reason to upgrade your electric panel is if it’s too small. To say it’s “too small” means it doesn’t supply enough power. One sign of insufficient power is that fuses are frequently blowing or circuit breakers are flipping off. Or possibly, a contractor has told you that your home or business needs more power for a new air conditioner or other installation.

What is an electrical panel?

The power from the electric utility company flows through large wires to your home and into the panel, a large metal box with fuses or circuit breakers inside. The panel controls the flow of electricity throughout the house, cutting the flow with fuses or circuit breakers if power levels rise too high.

If you think of your home electrical system as having branches and twigs like a tree, your electrical panel is the tree trunk. From the panel, the current flows into major electrical branches which dwindle into smaller and smaller branches and twigs, serving every part of your home.

An electrical panel may also be called a:

Breaker box
Circuit breaker panel or box
Power breaker
Fuse box or board
Electrical box or service
Panel board
Residential service
Service panel
Main panel
Distribution board

These all mean the same thing.

How do fuses and circuit breakers work?

If too much power were to flow into the wires in your home, they could melt and a fire could start. If you were to accidentally touch a damaged overloaded wire, you could receive an electrical shock.

To prevent more electrical flow than the wires are designed for, your electrical service panel is supposed to detect the problem and stop the flow immediately. In older electrical panels, a fuse blows. In newer ones, a circuit breaker flips off. Both fuses and circuit breakers are designed to break the circuit and cut the power to wires. Properly functioning circuit breakers (or fuses) are vital for your family’s safety and the safety of your home. Click here for more information about how to get the power back on if a circuit breaker has flipped off.

How do I know if my electrical panel is too small and should be upgraded?

If circuit breakers are flipping or fuses are blowing often, it likely means that your electrical system needs enlargement, including possibly a panel upgrade. Here are common situations which call for enlarging an electrical system:

A move to a house with an old undersized service
Adding central air conditioning
Adding an oven, hot tub, spa, power equipment in your garage, etc.
A room addition
A kitchen renovation

Fuse Boxes

Older electrical panels have fuses rather than circuit breakers. In the days when fuse boxes were installed, homes needed considerably less power. Many fuse boxes were designed to handle 30-60 amps of power whereas the appliances and electronics in today’s homes often require 100-200 amps of power or more.

Fuse boxes may become overloaded, blowing fuses and shutting down your appliances. This is an inconvenience, and there’s a temptation to buy larger fuses so that they won’t blow so often. But, oversized fuses can allow overloading and overheating of wires. Occasionally, someone will have put a penny in the opening to replace a blown fuse. This can really create a fire hazard because a penny can’t break the circuit.

A little known danger of fuse boxes is that homeowners can accidentally stick their fingers into the fuse opening, possibly while changing the fuse, and be electrocuted. The safe solution is to upgrade with modern circuit breakers.

Circuit Breaker Brands

Specific brands of circuit breakers, especially those installed in earlier decades, have been found to deteriorate with age and pose a safety hazard. You can go to the free website Inspectopedia and search on the brand of your circuit breaker to check its safety.

If you want to learn more about electrical panels, including some unsafe brands, click here. You can also ask us to check out your electrical panel. Call us 8-5 at (818) 446-0888. The Electric Connection provides free over-the-phone estimates and free home inspections, including checking the safety and sizing of your panel, with every electrical job. We look forward to talking with you.

Kim Hopkins

CEO, The Electric Connection

What are CFLs — Can They Save Electricity and Save You Money?

Posted on July 22, 2011 | by K Hopkins | 2 Comments

CFLs are those new, small fluorescent light bulbs that screw into most regular light fixtures. You can use them to replace regular (incandescent) bulbs to save money and electricity. As the Los Angeles Department of Water and Power gets over 60% of its electricity from fossil fuels, especially coal, any time you replace a regular incandescent bulb with a CFL, it’s one small step towards reducing fossil fuel use in L.A.

CFLs come in all different shapes, but basically they’re a fluorescent tube bent this way or that or twisted into a spiral. “CFL” stands for “Compact Fluorescent Lamp.” They’re more compact than the long fluorescent tubes of our childhoods. They’re lamps, which is electrician-speak for “light bulb.” Here’s why they’re green — they save 75% of the energy that traditional incandescents use.

Here’s why they save you money — they cost more than a regular incandescent, but last a lot longer — 13 times longer. So even though each CFL costs more per bulb (about $4 for a CFL), it will also save you about $4 in bulbs as you won’t have to replace it so often.

Your electric bill will show more significant savings. Lighting costs about $20 out of $100 monthly electric bill. Because CFLs use one-quarter of the electricity of a regular incandescent, if you replace all the bulbs in your house with CFLs, you’ll save about $15 each month on a $100 electric bill.

CFLs are green, but not blue. Many people don’t enjoy the eerie bluish light of the old-fashioned long fluorescent tubes. CFLs can create all different colors of light, including warm tones. A recent study by the magazine Popular Mechanics found that even when people didn’t know which type of bulb was involved, they preferred the light of the CFL over the light from incandescent bulbs. CFLs also don’t buzz as the long tubes did.

CFLs have one downside — they each contain a small amount of mercury, which is a toxin. If a bulb breaks, you’ll need to take care to clean every bit up and to not touch the pieces. You’ll need to recycle spent bulbs or dispose of them as you would paint or other hazardous waste. However, they’re so long lasting that this will come up on the order of years, rather than months.

OK so you have a basic understanding of CFLs, now what can you do that’s simple to save money and electricity? The next time you go to the store, pick up a four-pack of CFLs. Choose four incandescent lights in your home or business that you use often and replace the incandescent bulbs with your new CFLs. You’ll start saving on your electric bill and will decrease the burning of fossil fuels to power Los Angeles.

Click here for more tips on saving electricity.